IMBERAL^® VE 89V

USE
IMBERAL^® VE 89V is used to reinforce crack-bridging coating masses, to check coat thickness and to increase mechanical load capacities.

Areas of application:

• Plastic-modified thick bitumen coatings
• Coating reinforcement

QUANTITY REQUIRED

Per m2 area

1.05 m2 fabric

PREPARATION OF THE SURFACE
The substrate must be prepared in accordance with the instructions provided for the relevant sealant system.

APPLICATION

	1.	Cut the fabric to the required length.
	2.	Apply the first layer of coating mass.
	3.	The fabric is embedded into the first waterproofing layer while still wet. In this case, the fabric must not be pressed through to the substrate.
	4.	The fabric is then covered with the second waterproofing layer. IMBERAL® VE 89V must be completely covered with the coating and must not protrude from the coating at any point.

IMPORTANT NOTES

• IMBERAL^® VE 89V must be embedded in the middle of the waterproofing layers.
• The fabric sheets must be applied with an overlap of.
• Follow the codes of practice for the respective sealants.

SAFETY PROVISIONS/RECOMMENDATIONS
No special measures required.

DISPOSAL
The local waste removal regulations must be observed.

SPECIFICATIONS

Packaging Delivery form Basis weight Warp tear strength untreated 28 d 5 % NaOH Weft tear strength untreated 28 d 5 % NaOH Storage

Roll 50 m2, 1.0 m wide/50 m long Roll 25 m2, 0.5 m wide/50 m long Single roll 100 g/m² approx. 1,600 N approx. 800 N approx. 1,700 N approx. 840 N 24 months

• Safety data sheet
• Technical bulletin
• Brochure