INTRASIT^® BLK 18OS

USE
INTRASIT^® BLK 18OS is particularly well-suited for water- proofing wall sections above the line of impounded water and pressurized water using the low-pressure method.

Areas of application:

• Masonry without voids and cavities
• Horizontal damp courses
• Low-pressure injections < 10 bar

QUANTITY REQUIRED

Reference value for 30 cm lime-sandstone masonry using the drill hole method The quantity required depends on the absorbency of the masonry.

approx. 0.5 kg/linear metre

PREPARATION OF THE SURFACE
Masonry must be free of voids and cavities. If masonry is porous or brittle, use INTRASIT^® BLS 54TR to fill voids, cavities and/or cracks in the masonry.

APPLICATION
The relevant guidelines are DIN 1053 for masonry and WTA (international association for science and technology of building maintenance and monuments preservation) information sheet 4-4-03D (application guidelines for chemical waterproofing methods).

		Creating a horizontal damp course using the drill hole method
	1.	Drill holes at intervals of 10 - 12 cm (the drill hole diameter depends on the packer used). Depending on the condition of the masonry and the degree of humidity penetration of the brickwork, holes can be drilled in one or two rows. For moisture saturation above 75 %, the horizontal damp course must be created in 2 rows.
	2.	Blow the drill holes.
	3.	Fill up large voids or cavities with INTRASIT® BLS 54TR. Inject INTRASIT® BLK 180S following the initial hardening of the drill hole suspension.
	4.	INTRASIT® BLK 180S with water in a mixing ratio of 1 : 7 for masonry with high moisture penetration, or up to 1 : 14 for lower levels of moisture penetration. Add INTRASIT® BLK 180S to clean, clear tap water and stir well. The stability of the mixed solution depends on the individual hardness of the water, but is usually at least 1 week.
	5	Inject the solution using the low-pressure method (< 10 bar). Document the quantities of material used. If you have not injected enough of the product, re-inject if necessary.
	6.	Wash all processing equipment with clean water immediately after use.

IMPORTANT NOTES

• Mix the product in clean, clear tap water only. Always pour clear water in the mixing bucket first, then add INTRASIT^® BLK 180S in the required mixing ratio.
• Document the quantity of material used.
• Read the WTA information sheets.
• Please also read the brochure “INTRASIT^® remedial interior basement wall repair“.
• The volatile organic compound content is about 3 %, depending on the dilution.
• Clean all valves and hoses of pump systems with water after use, as otherwise the packer mounting head may become blocked.

SAFETY PROVISIONS/RECOMMENDATIONS
Information regarding the safety during transport, storage and handling are included in the updated safety data sheet.

DISPOSAL
The local waste removal regulations must be observed.

SPECIFICATIONS

Packaging Container size Delivery form Density Application temperature Storage

PE/tin bucket 20 kg /5 kg 24 containers/pallet 1.05 kg/l +5 °C to +35 °C frost-free, 12 months

• Safety data sheet
• Test certificates
• Technical bulletin
• Brochure