Weitere Marken von Sievert
Jesteś tutaj:
- Produkte
- Foundation Wall Protection Systems
- Accessories
- IMBERAL® DB-PV 89ZH
IMBERAL® DB-PV 89ZH
Sealing tape polypropylen-fleece
Applications:
- interior and exterior
- movement joints
- connection joints
- connections
- plinth waterproofing
CHARACTERISTICS
IMBERAL® DB-PV 89ZH is a special sealing tape made of transversely elastic and longitudinally stable polypropylene fleece. The IMBERAL® DB-PV 89ZH is fleece-laminated on both sides for optimum adhesion.
IMBERAL® DB-PV 89ZH is a special sealing tape made of transversely elastic and longitudinally stable polypropylene fleece. The IMBERAL® DB-PV 89ZH is fleece-laminated on both sides for optimum adhesion.
- waterproof
- highly elastic
- fleece-laminated
- high adhesion to the surface sealing
- water-, weather- and alkali-resistant
USE
IMBERAL® DB-PV 89ZH is used for bridging movement and component joints as well as the flexible and waterproof formation of edge and connection joints on walls and floors, indoors, outdoors and in wet areas. Furthermore, it is used for the integration of built-in parts made of wood, plastic and metal in connection with FPD sealing.
IMBERAL® DB-PV 89ZH is used for bridging movement and component joints as well as the flexible and waterproof formation of edge and connection joints on walls and floors, indoors, outdoors and in wet areas. Furthermore, it is used for the integration of built-in parts made of wood, plastic and metal in connection with FPD sealing.
Fields of
QUANTITY REQUIRED
* carton onlyPREPARATION OF THE SURFACE
The substrate must be prepared according to the specifications in the technical data sheet of the waterproofing and/or bonding material to be used. As a rule, the substrate must be load-bearing and free of dust, dirt and other adhesion-reducing substances.
APPLICATION
Apply the selected waterproofing material as a contact layer and work in the joint tape over the entire surface without leaving any bubbles. Then rework with the respective waterproofing material.
IMPORTANT NOTES
SAFETY PROVISIONS/RECOMMENDATIONS
no particular measures necessary.
DISPOSAL
The local waste removal regulations must be observed.
| per running meter | 1 m |
* carton onlyPREPARATION OF THE SURFACE
The substrate must be prepared according to the specifications in the technical data sheet of the waterproofing and/or bonding material to be used. As a rule, the substrate must be load-bearing and free of dust, dirt and other adhesion-reducing substances.
APPLICATION
Apply the selected waterproofing material as a contact layer and work in the joint tape over the entire surface without leaving any bubbles. Then rework with the respective waterproofing material.
IMPORTANT NOTES
- Work the sealing tape into expansion and movement joints in loops
- Observe the processing instructions of the respective waterproofing product used.
SAFETY PROVISIONS/RECOMMENDATIONS
no particular measures necessary.
DISPOSAL
The local waste removal regulations must be observed.
SPECIFICATIONS
| Roll Width Thickness Colour Inner corner* Delivery form Outer corner* Delivery form Storage | 20 m 120 mm, 250 mm, 500 mm 0.6 mm (+/- 0.1 mm) grey 60 × 60 × 120 mm 25 pieces/carton 60 × 60 × 120 mm 25 pieces/carton frost-free, 24 months |