CHARACTERISTICSVESTEROL
® TG 10D is a solvent-free, low-odour primer with good penetration.
VESTEROL
® TG 10D binds dust and improves the stability of absorbent substrates.
- Solvent-free
- Low-odour
- Deep-stabilizing
- Universal in use
INGREDIENTSSynthetic dispersion, wetting agent
USEVESTEROL
® TG 10D is used as a primer for treating surfaces before painting with synthetic emulsion paints and before applying mineral or resin-based plaster systems.
It is also used as a primer for roof coatings on bitumen roofs and fibre-reinforced cement tiles. Acts as a surface stabilizer for mineral, absorbent, and slightly dusting substrates, including calcium sulphate screeds.
Areas of application:
- Outdoors and indoors
- Façades
- Sanding and dusting screeds
- Bitumen roofs and fibre-reinforced cement tiles
- Wood, plasterboard, hardboard and chipboard
QUANTITY REQUIREDPer coat | approx. 0.15 l/m2 |
1) At +20 °C and 60 % relative atmospheric humidity.
PREPARATION OF THE SURFACEThe substrate must be dry, clean, and free of any loose material and debris.
APPLICATIONThe guideline is DIN 18550 for plaster.
| 1. | Apply the product with a brush, paintbrush or spraygun. |
| 2. | Subsequent coatings can be applied after VESTEROL® TG 10D has dried completely. |
| 3. | Clean all processing equipment with water immediately after use. |
SAFETY PROVISIONS/RECOMMENDATIONSFor detailed information regarding safety during transport, storage and handling, refer to the updated safety data sheet.
DISPOSALThe local waste removal regulations must be observed.
SPECIFICATIONSPackaging
Container size
Delivery form
Density
Application temperature
Drying time1)
Storage | PE container
20 l /5 l
24 / 120 containers/
pallet
1.01 kg/l
+5 °C to +35 °C
approx. 2 hours
frost-free, 12 months |