HADALAN^® Acryl 10D

Acrylate coating for exterior and interior areas

CHARACTERISTICS
HADALAN^®Acryl 10D is a fast-drying sealing can be deluted with water, on a pure acrylic base.
The paint emits little odour during the processing and dries into a tough, satin-finish coating with good weather resistance.

Tread-resistant
Fast drying
Low-odour
Tough
Good abrasion resistance

INGREDIENTS
Plastic dispersion, pigments, fillers

USE
HADALAN^®Acryl 10D for colour coating of wall or floor surfaces of concrete or screed.
For protection from weathering for fibre cement plates and after concrete refurbishing work.

Areas of application:

Outdoors and indoors
Basements and hobby rooms, basement stairs, lofts, access walkways, balconies etc.
Roof surfaces of fibre cement corrugated plates
Concrete, screed, plaster, metal, wood

QUANTITY REQUIRED

Primer
Top coat

approx. 0.10 kg/m²
approx. 0.15 kg/m²

¹⁾At +20 °C and 60 % relative atmospheric humidity.PREPARATION OF THE SURFACE
The substrate must be clean, firm, capable of bearing load and dry. Firm up sandy substrates and external surfaces with VESTEROL^®TG 10D. Treat absorbent mineral substrates with HADALAN^®Acryl 10D diluted with water in the ratio of 1 : 1 treat after watering down. Thorough drying 4-6 hours.

APPLICATION

	1.	The HADALAN^®Acryl 10D is applied with a brush, a ceiling brush or a roller.
	2.	Clean all processing equipment with water immediately after use.

On rough and contrasting coloured substrates, a second coat may be applied after approximately 4 hours. 4-6 hours after the last coat, it is possible to carefully walk on the surface.IMPORTANT NOTES

Maintain the processing temperature of +5 °C to +35 °C.
Not suitable for floors that are subjected to intense mechanical and/or chemical attacks (industrial floors).
Not suitable for floors with tyre loads, e.g. garages, tyre warehouses etc.

SAFETY PROVISIONS/RECOMMENDATIONS
For detailed information regarding safety during transport, storage and handling, refer to the updated safety data sheet.

DISPOSAL
The local waste removal regulations must be observed.

SPECIFICATIONS

Packaging
Barrel
Delivery form
Colour shade

Density
Processing temperature
Rain resistant¹⁾
Fully hardened¹⁾
and resilient
Storage

PE bucket
5 l
80 barrels/pallet
stone grey approx. RAL 7030
1.29 kg/l
+5 °C to +35 ℃
after 4 to 6 hours

after approx. 24 hours
frost-free and cool 12 month