HADALAN^® SM 57DD

USE
HADALAN^® SM 57DD increases the stability of liquid products and simplifies processing on vertical surfaces.

QUANTITY REQUIRED
Adhesive layer on vertical surfaces consisting of
HADALAN^® BM2K 12P 2.0 kg
HADALAN^® SM 57DD 3.0 l
HADALAN^® BSA 17DD 80 g
Required adhesive layer approx. 0.30 to 0.40 kg/m²

Filler covering on vertical surfaces consisting of
HADALAN^® MST 89M 25 kg
HADALAN^® BM2K 12P 2.0 kg
HADALAN^® SM 57DD 3.0 l
HADALAN^® BSA 17DD 80 g
Required filler covering ca. 10 kg/m²

Consumption HADALAN^® LF68 12P
Adhesive layer on vertical surfaces consisting of:
HADALAN^® LF68 12P 1.0 kg
HADALAN^® SM 57DD 2.0 l
Requirement adhesive layer approx. 0.30 to 0.40 kg/m²

Levelling coat on vertical surfaces consisting of:
HADALAN^® MST 89M 25 kg
HADALAN^® LF68 12P 1.25 kg
HADALAN^® SM 57DD 2.5 l
Required trowel coat approx. 10 kg/m²

APPLICATION

		Adhesive layer with HADALAN® BM2K 12P on vertical surfaces
	1.	Mix HADALAN® BM2K 12P in a separate container according to the processing instructions.
	2.	Add the necessary quantity of HADALAN® SM 57DD to the binder and mix.
	3.	To activate the reaction, add the required amount of HADALAN® BSA 17DD and mix.
	4.	Apply the finished mixture to the prepared surface using a roller.
		Levelling coat with HADALAN® BM2K 12P on vertical surfaces
	1.	Pour HADALAN® MST 89M into a mixing vessel.
	2.	Mix HADALAN® BM2K 12P in a separate container according to the processing instructions.
	3.	Add the homogeneously mixed binder HADALAN® BM2K 12P to the marble stones HADALAN® MST 89M and mix.
	4	Now add the required amount of HADALAN® SM 57DD to the mixture of marble stones and binder and mix.
	5.	To activate the reaction, now add HADALAN® BSA 17DD in the required quantity and mix.
	6.	The finished mixture is worked into the fresh adhesive layer, compacted and levelled.
	7.	Ensure an even layer thickness when applying the material.
	8.	Cleaning the units when fresh with HADALAN® EPV 38L.
	9.	Cured material can only be removed mechanically.
		Filler coating with HADALAN® LF68 12P on vertical surfaces
	1.	Mixing of the adhesive layer for vertical surfaces: Mix 1 part by volume of HADALAN® LF68 12P with 2 parts by volume of HADALAN® SM 57DD using a suitable stirrer with LX stirrer until a stable paste is obtained or mix one bottle of 1.25 kg HADALAN® LF68 12P with 2.5 l HADALAN® SM 57DD as described above.
	2.	Mixing of natural stone for vertical surfaces: Mix 25 kg HADALAN® MST 89M and 1.25 kg HADALAN® LF68 12P using a mixer with MK stirrer. Then mix in 2.5 l HADALAN® SM 57DD until a homogeneous mass is obtained.
	3.	Even application of the adhesive layer.
	4.	Fresh in fresh, the previously mixed HADALAN® MST 89M is worked into the adhesive layer, compacted and levelled.

IMPORTANT NOTES

• Always use only one batch of material for visually coherent surfaces.
• Comply with the data sheets of the system products used.
• The processing time is shortened by adding the setting agent.
• Caution when filling. The material is very light and is quickly dispersed by wind.

SAFETY PROVISIONS/RECOMMENDATIONS
Please comply with the hygiene measures and safety precautions usual when handling chemicals products. Wear suitable protective clothing.

DISPOSAL
The local waste removal regulations must be observed.

APPLICATION

• Ensure an even layer thickness when applying the material.
• Clean the units when fresh with HADALAN^® EPV 38L.
• Cured material can only be removed mechanically.

SPECIFICATIONS

Packaging Container Delivery form Density Storage

PE bucket 5 l 80 containers/pal. Approximately 50 g/l 24 months

• Safety data sheet
• Technical bulletin
• Brochure