CHARACTERISTICSHADALAN
® ColourPowder is a special pigment mixture for colouring reactive resins.
- Easy to stir in
- Solvent-free
- Powdery
INGREDIENTSColour pigments
USEHADALAN
® ColourPowder is used for pigmentation in the HADALAN® Velo balcony system and is stirred into the system product on site
Areas of
QUANTITY REQUIREDRecommended additions:
HADALAN
® Velo-Base 3 kg container - 1 bag HADALAN
® ColourPowder
10 kg container - 2 bags HADALAN
® ColourPowder
HADALAN
® Velo-Seal
13 kg container - 1 bag HADALAN
® ColourPowder
HADALAN
® Velo-Flex
3 kg container - 1 bag HADALAN
® ColourPowder
PREPARATION OF THE SURFACEPlease observe the information from the technical data sheets of the system products.
APPLICATIONFor colouring the coating, the colour pigment HADALAN
® ColourPowder is stirred into component A (resin) using a suitable stirrer (DLX or LX stirrer) without leaving streaks.
Subsequently, the entire component B (hardener) is added to component A (resin) and mixed homogeneously.
Please observe the instructions in the technical data sheets of the system products.
IMPORTANT NOTES- The colour shades indicated are approximate colour shades that do not correspond to the exact RAL standard shades.
- The colour effect is influenced by the addition of fillers; if necessary, create sample surfaces.
- For unicoloured surfaces, only use complete and uniform container units. Partial quantities can lead to colour deviations.
- Changing the container units on the surface can lead to differences in colour shade.
- Maintain a working temperature of +10 °C to +30 °C.
- Only use materials from one batch.
- In the case of coating systems that can be laid by hand, traces of the laying process may remain visible. This applies in particular to grazing light or larger connected areas; if necessary, create a sample area.
- To maintain the surface quality of the coating, it is recommended to use care products and to clean the floors regularly (see care instructions HADALAN® epoxy resin floorings).
- Abrasive loads lead to white fracture on the surface.
SAFETY PROVISIONS/RECOMMENDATIONSDetailed information on safe transport, storage and handling can be found in the current safety data sheets.
DISPOSALThe local waste removal regulations must be observed.
SPECIFICATIONSPackaging
Container
Shades
Light ivory
Grey beige
Traffic yellow
Traffic red
Signal blue
Traffic green
Beige grey
Brown grey
Anthracite grey
Stone grey
Pebble grey
Light grey
Deep black
Pure white
Solid content
Storage | PE-bag
0.3 kg
RAL 1015
RAL 1019
RaL 1023
RAL 3020
RAL 5005
RAL 6024
RAL 7006
RAL 7013
RAL 7016
RAL 7030
RAL 7032
RAL 7035
RAL 9005
RAL 9010
100 %
frost-free and dry,
at least 12 months |