Weitere Marken von Sievert
Suche

INTRASIT® SM 54Z

Waterproof mortar for waterproofing work and coves
CHARACTERISTICS
INTRASIT® SM 54Z is a factory-mixed, hydraulically setting waterproof mortar.
It provides high adhesive tensile strength and mechanical strength due to its favourable combination of grain size, high-grade cement and polymer powder.
  • Easy to apply
  • Universal in use
  • Frost-resistant
  • Water-repellent
  • Good adhesion
  • High adhesion values and strengths already after 24 hours

INGREDIENTS
Standard cements, mineral aggregates, additives, synthetic dispersion powder, sealant

    USE
    INTRASIT® SM 54Z is used to create waterproof plasters and coves. On masonry and concrete As a masonry and joint mortar.

    Areas of application:

    • Below ground
    • Concrete and screed surfaces
    • Cellar sealing
    • Plinth plaster

    QUANTITY REQUIRED
    Per 1 cm plaster thickness
    Coves
    approx.18 kg/m2
    approx. 2 kg/linear metre

      PREPARATION OF THE SURFACE
      The substrates must be firm, resilient, free of frost, dust, dirt and mortar residues.

        APPLICATION
        Guidelines are DIN 1053 for masonry and DIN V 18550 for plaster.
        Prime the surface with INTRASIT® Aquarol 10A. Alternatively, wet the surface in such a way that when you apply the primer, the surface has a matt-damp appearance.
        1.Slowly add INTRASIT® SM 54Z to clear water in a clean mixing container while stirring it well until it becomes a smooth paste.

        Recommended mixing ratios:

        Pneumatic mortar:
        25 kg INTRASIT® SM 54Z + 3.5 l water
        + 1 kg HADALAN® HE 10D

        Waterproof mortar:
        25 kg INTRASIT® SM 54Z + 4.0 l water

        Waterproof mortar for use below ground:
        25 kg INTRASIT® SM 54Z + 3.0 l water
        + 1 l IMBERAL® BES 10B

        Repair mortar:
        25 kg INTRASIT® SM 54Z + 3.0 l water
        + 1 kg HADALAN® HE 10D
        2.Apply mortar within 30 minutes using the standard tools.
        3.Clean all processing equipment with water immediately after use.

        IMPORTANT NOTES
        • Observe the working temperature of +5 °C to +30 °C.
        • Keep to a working time of 30 minutes.

        SAFETY PROVISIONS/RECOMMENDATIONS
        Contains cement and will cause alkaline reactions when it comes into contact with moisture or water.
        Information regarding the safety during transport, storage and handling are included in the updated safety data sheet.

          DISPOSAL
          The local waste removal regulations must be observed.

            SPECIFICATIONS
            Packaging
            Container size
            Delivery form
            Mortar group
            Application temperature
            Processing time
            Can be further processed
            Capable of taking up loads
            Compressive strength
            after 24 hours
            after 28 days
            Storage
            paper bag
            25 kg
            42 sacks/pallet
            P III
            +5 °C to +30 °C
            30 minutes
            after approx. 2 hours
            after 7 days

            > 5 N/mm2
            approx. 24 N/mm2
            dry, 6 months


              Produkty systemowe